Once formed, the board travels the length of the production line on a series of setting belts, and sections of rollers to the shear.
During this journey, the plaster core has time to set, or harden, and the required product information (including: product name and type, relevant British Standards, date and time of manufacture) is printed on the back of the boards via an ink jet printer.
At the shear, the long train of board is cut into panels of specific length. These smaller boards are then turned over and passed into a multi-level dryer.
During the drying period, the excess water, which was required to form the initial slurry, is gently evaporated off.
After the boards have dried, they are trimmed and stacked to form pallets. These pallets are then placed in the warehouse after which they will be loaded onto trucks for distribution throughout the UK.